Overview
Path Way® Remotely Controllable Network Switch
Model 7363 6-Channel RJ45 T1 Interface SVCN/GPCN Switch, with RS232 Remote
SPECIFICATIONS:
- PORT CONNECTORS: (3) RJ45 female connectors labeled SVGN, GPCN and COM for each of six channels.
- FRONT PANEL CONTROLS: (1) Front panel pushbutton allows local switching.
- DISPLAY: (2) Front panel LED's display switch position and power status.
- REMOTE: (1) DB9 female connector on rear panel accepts ASCII RS232 Serial Data for Remote Control Operation.
- POWER: UL approved 1100VAC/240VAC, 60Hz/50Hz wall mount power module supplies
12 VDC, 500mA to the unit. Has 2-prong, US, non-polarized plug.
- DIMENSIONS: Rackmount configuration 19.0" W x 1.75" H x 8.0" D.
(48.3 x 4.4 x 20.3 cm)
- WEIGHT: Approximately 4.8 lbs. (2.2 kg)
FEATURES:
- Each channel allows access to the SVCN or GPCN port from one COMMON T1 network or port.
- Switches pins 1, 2, 4 and 5 of the RJ45 interface.
- Switching inhibited for 15 seconds after a position change.
- All six channels switch simultaneously.
- Local control via front-panel pushbutton.
- The REMOTE port accepts RS232 Serial Data ASCII commands for switch position control, monitoring, and lockout of front panel operations.
- Front panel LED's display switch position and power status.
- Retains last switch position in the event of a power loss and continues to pass data.
- Compatible with the Model 5527A SVCN/GPCN/OFFLINE Display Indicator Unit (Catalog #305527A).
- Rugged aluminum case provides EMI/RFI shielding.
The PathWay® Model 7363 6-Channel RJ45 T1 Interface SVGCN/GPCN Switch allows a device connected to the COM port access to the SVCN or GPCN port for each channel.
The DB9 Remote port allows the user to both control and monitor the switch position remotely. The remote port also allows the user to connect the Model 5527A SVCN/GPCN/OFFLINE Display Indicator Unit (Catalog# 305527A).
OPTION: WIDE RANGE POWER MODULE, Cat No. 517277 |
CE, RoHS, and UL listed table mount power module, 100 VAC/240 VAC, 50Hz-60Hz for use in place of the standard power module. Has IEC 60320 C14 inlet. Ideal for international applications. Click Accessories tab to view.
|
A Y-Cable that allows connection to both a Remote Computer and the Model 5527A Display Indicator Unit is available as an option. (Cat. No. 988799)
Model 7363 pictured below connected to the Model 5527A Display Unit.
Illustrates the display when switch is in GPCN position.
Click Product Accessories Tab!
Model 7363 pictured below connected to the Model 5527A Display Unit.
Illustrates the display when switch is in SVCN position.
Click Product Accessories Tab!
Electro Standards can supply all of your Network Cable requirements. Click here to reach our CABLES, COPPER NETWORK Webpage.
For custom network switches call our friendly customer support staff at 401-943-1164, email eslab@electrostandards.com, or complete our online form: /Products-Custom/Copper-Switch/
All data switches, data communication products, and data acquisition products are subject to a one year warranty against manufacturing defects. The limit of ESL liability is limited to the cost of the ESL product provided.
*Prices online are subject to change and verification.
All ESL products are available for export.